Metal Face Trim Plates (Stainless Steel – Natural Wonders)

FAST INSTALLATION INSTRUCTIONS

1. Clean surface of waterfall lip. Make sure there is no debris, silicone or other material covering the lip. Also make sure the lip is dry.

2. Peel just a little of the protective tape on the front to make sure the waterfall plate is the correct color.

3. Turn plate over and remove RED tape on back of the plate (leave the tape on the other side in place until after plate is installed)

4. Carefully place the plate over opening. Do not press down until you are sure the plate is directly over the opening and is covering all the waterfall face (use the lip guard if it is still available)

5. Once you are sure the plate is positioned correctly, press firmly to secure to the waterfall and remove protective tape.

WARNING: Edges are very sharp, please use care when handling and installing.