How do I synchronize the controller and remote (Colorwheel Control)

e-syncing the remote and controller:

• Power off the controller and remote.
• Make sure the remote is fully charged.
• Turn on controller.
• Press and hold the on/off button on controller until you hear a tone (keep holding).
• Within 5 seconds turn on the remote and press and hold #1 key until remote flashes green.
• Release both buttons.
• You should now be back in sync.
• If still not in sync, repeat the process.

Please note: This is strictly a timing set up and it is not uncommon to take a couple tries to get the timing right.