Light Module is hard to install and/or remove.

If the light is difficult to install or remove, try the following:

1. To install, push the module down with force to seal the bottom O-Rings in the electrical conduit socket. Use the Installation Tool, a 3/8″ socket wrench, and a 3/8″ socket extender to help turn the Light Module clockwise until it reaches the locked position.
2. To remove, use the Installation Tool, a 3/8″ socket wrench, and a 3/8″ socket extender to turn the Light Module counterclockwise. Ramps in the Center Wheel will help un-seal the O-Rings from the conduit socket as it rotates.