MY WATERFALL HAS ‘BREAKS’ IN THE SHEETING AND DOES NOT HAVE A SMOOTH FLOW.

‘Breaks’ in the sheeting could be due to the following:

• Debris may be caught in the lip.
  • Use the cleanout tool or a thin flat tool to clear the lip. DO NOT CUT ANY SUPPORTS.
  • Make sure the rock trap is installed properly and is not clogged.
• Check for burrs on supports in LED waterfalls.
  • A thin hacksaw blade may be used to carefully smooth edges as needed. REMEMBER NOT TO CUT THE SUPPORTS.
• GPM may be inaccurate. Too little flow or too much flow through the waterfall prevents proper water flow.
  • Reference the chart in the installation guide for proper GPM.
  • Also verify there are no air/leaks in the equipment or plumbing.
• Filter
  • The water line running to the waterfall must be filtered. We recommend the CMP Water Feature Filter or other cartridge filter.